GOODWILL MDO-2000E sorozatú kevert időalapú oszcilloszkópok

 

  • 200/100/70MHz sávszélesség, 2 vagy 4 csatorna
  • Valós idejű mintavétel csatornánként 1GS/s (2 csatornás modellek)
  • Maximális valós idejű mintavétel 1GS/s (4 csatornás modellek)
  • MDO-2000EG spektrumanalizátorral és 2 csatornás 25MHz-es arbitrázs generátorral
  • MDO-2000EX spektrumanalizátorral, 2 csatornás 25MHz-es arbitrázs generátorral, digitális multiméterrel és tápegységgel
  • 10M memóriamélység csatornánként VPO jelalak technológia
  • Jelaalk frissítés 120.000 wfm/s
  • 8″-os WVGA TFT LCD kijelző
  • Maximum 1M FFT

 

Description

MSO-2072E(A) MSO-2074E(A) MSO-2102E(A) MSO-2104E(A) MSO-2202E(A) MSO-2204E(A)
VERTICAL Channels 2Ch+EXT 4Ch 2Ch+EXT 4Ch 2Ch+EXT 4Ch
SENSITIVITY Bandwidth DC~70MHz(-3dB) DC~100MHz(-3dB) DC~200MHz(-3dB)
Rise Time 5ns 3.5ns 1.75ns
Bandwidth Limit 20MHz 20MHz 20M/100MHz
Vertical Resolution 8 bits : 1mV ~ 10V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF approx.
DC Gain Accuracy ±(3% when 2mV/div or greater is selected ; ±(5%) when 1mV/div is selected
Polarity Normal & Invert
Maximum Input Voltage 300Vrms , CAT I (300Vrms CAT II with GTP-070B-4/100B-4/200B-4, 10 : 1 probe)
Offset Position Range 1mV/div ~ 20mV/div : ±0.5V ; 50mV/div ~ 200mV/div : ±5V ; 500mV/div ~ 2V/div : ±25V ; 5V/div~10V/div : ±250V
Waveform Signal + , – , × , ÷ , FFT , FFTrms , Uesr Defined Expression
Process FFT : 1Mpts ; FFT : Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS ; FFT Window Displays : Rectangular, Hamming ,
Hanning, Blackman-Harris
TRIGGER Source CH1 ,CH2, CH3, CH4, Line, EXT* ; *dual channel models only.
Trigger Mode Auto (Supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Trigger Type Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate, Time out, Event-Delay(1~65,535 events),Time-Delay(Duration;4ns~10s), Bus
Trigger Holdoff Range 4ns ~ 10s
Coupling AC, DC, LF rej. , Hf rej. , Noise rej.
Sensitivity 1div
EXT TRIGGER Range ±15V
Sensitivity DC ~ 100MHz Approx. 100mV; 100MHz ~ 200MHz Approx. 150mV
Input Impedance 1MΩ±3%, ~16pF
HORIZONTAL Time Base Range 1ns/div ~ 100s/div (1-2-5 increments); ROLL : 100ms/div ~ 100s/div
Pre-trigger 10 div maximum
Post-trigger 2,000,000 div maximum
Time Base Accuracy ±50 ppm over any 1 ms time interval
Real Time Sample Rate Max. : 1GSa/s (4ch model); Per channel 1GSa/s (2ch model)
Record Length 10Mpts/CH
Acquisition Mode Normal, Average, Peak Detect, Single
Peak Detection 2ns (typical)
Average Selectable from 2 to 256
X-Y MODE X-Axis Input Channel 1 ; Channel 3* ( * : four channel models only )
Y-Axis Input Channel 2 ; Channel 4* ( * : four channel models only )
Phase Shift ±3° at 100kHz
CURSORS AND Cursors Amplitude, Time, Gating Available; Unit : Seconds(S), Hz(1/S), Phase (Degrees), Ratio(%)
MEASUREMENT Automatic 38 sets : Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot,
Measurement FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, %Flicker, Flicker Idx., FRR, FRF,
FFR, FFF, LRR, LRF, LFR, LFF, Phase Cursors measurement
Control Panel Function Cursors measurement
Auto Counter 6 digits, range from 2Hz minimum to the rated bandwidth
Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset
Save Setup 20set
Save Waveform 24set
DISPLAY SYSTEM TFT LCD Type 8″ TFT LCD WVGA color display
Display Resolution 800 horizontal x 480 vertical pixels (WVGA)
Interpolation Sin(x)/x
Waveform Display Dots, Vectors, Variable persistence(16ms~10s), Infinite persistence
Waveform Update Rate 120,000 waveforms per second, maximum
Display mode YT ; XY
Display Graticule 8 x 10 divisions
INTERFACE USB Port USB 2.0 Full-speed host port x 1, USB High-speed 2.0 device port x 1
Ethernet Port (LAN) RJ-45 connector, 10/100Mbps with HP Auto-MDIX
Go/NoGo BNC 5V Max/10mA TTL open collector output
Kensington Style Lock Rear-panel security slot connects to standard Kensington-style lock
LOGIC Sample Rate Per Channel 1GSa/s
ANALYSER Bandwidth 200MHz
SPECIFICATIONS Record Length Per Channel 10M pts (max)
Input Channels 16 Digital (D15 – D0)
Trigger Type Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART(RS232/422/485), CAN, LIN), Parallel Bus
Thresholds Quad D0~D3, D4~D7,D8~D11 ,D12~D15 Thresholds
Threshold Selections TTL, CMOS(5V,3.3V,2.5V), ECL, PECL,0V ,User Defined
User-defined Threshold Range ±5V
Maximum Input Voltage ±40 V
Minimum Voltage Swing ±250 mV
Vertical Resolution 1 bit
AWG Channels 2
SPECIFICATIONS Sample Rate 200 Msa/s
(MSO-2000EA only) Vertical Resolution 14 bits
Max. Frequency 25 MHz
Standard Waveform Sine, Square, Pulse, Ramp, DC, Noise
Built-in ARB Waveform Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine, Cardiac
Output Range 20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50 Ω
Output Resolution 1mV
Output Accuracy 2% (1 kHz)
Offset Range ±2.5 V, HighZ;±1.25 V, 50 Ω
Offset Resolution 1mV
POWER SOURCE Line Voltage Range AC 100V ~ 240V, 48Hz ~ 63Hz, auto selection
MISCELLANEOUS Multi-Language Menu Available
On-Line Help Available
Time clock Time and date, provide the date/time for saved data
Operation Environment Temperature: 0°C to 50°C. Relative Humidity: ≤80%, 40°C or below; ≤45%, 41°C ~ 50°C
DIMENSIONS & WEIGHT 384(W) X 208(H) X 127.3(D)mm, Approx. 2.8 kg
Note : Three-year warranty, excluding probes & LCD display panel. Specifications subject to change without notice. MSO2000GD1DH