Pico 4000 USB oszcilloszkópok

Leírás

• Oscilloscope — vertical
  Model	PicoScope 4424	PicoScope 4224	PicoScope 4224 IEPE
  			Passive probe mode	IEPE interface mode
  Input channels	4	2
  Bandwidth	DC to 20 MHz			1.6 Hz to 20 MHz
  	(10 MHz on ±50 mV range)
  Rise time (10% to 90%, calculated)	17.5 ns (35 ns on ±50 mV range)
  Input type	Single-ended, BNC connector
  Vertical resolution	12 bits
  Enhanced vertical resolution	16 bits
  Input sensitivity	10 mV/div to 20 V/div		10 mV/div to 4 V/div
  Input ranges (full scale)	±50 mV to ±100 V in 11 ranges		±50 mV to ±20 V in 9 ranges
  Input coupling	Software-selectable AC/DC
  Input characteristics	1 MΩ || 22 pF			1 MΩ || 1 nF
  DC accuracy	±1%
  Overvoltage protection	±200 V (DC + AC peak)		±100 V (DC + AC peak)

  Oscilloscope — horizontal
  Maximum sampling rate (single shot)	1 or 2 channels: 80 MS/s* 3 or 4 channels: 20 MS/s	80 MS/s
  	* To achieve the stated sampling rate with two channels, enable one channel from A or B and one from C or D.
  Maximum sampling rate (continuous streaming mode)	10 MS/s (Record length limited to 20 MS in PicoScope, unlimited when using the supplied SDK)
  Timebase ranges	100 ns/div to 5000 s/div
  Buffer memory	32 M  samples shared between active channels
  Maximum buffer segments	10,000
  Timebase accuracy	50 ppm with ≤10 ps jitter

  Triggers
  Source	Any input channel
  Trigger modes	Free run, auto, repeat, single, rapid (segmented memory)
  Trigger types	Rising edge, falling edge, edge with hysteresis, pulse width, runt pulse, dropout, logic, windowed
  Trigger level	Adjustable over whole of selected voltage range
  Trigger sensitivity	Digital triggering provides 1 LSB accuracy up to full bandwidth.
  Maximum pre-trigger capture	10 x “per division” timebase setting
  Maximum post-trigger delay	50 s

  Spectrum analyzer
  Frequency range	DC to 20 MHz
  Display modes	Magnitude, peak hold, average
  Windowing functions	Blackman, Gaussian, triangular, Hamming, Hann, Blackman–Harris, flat–top, rectangular
  Number of FFT points	Selectable from 128 to 1 million in powers of 2
  Scale / units	X axis : linear or log 10 Y axis : logarithmic (dbV, dBu, dBm, arbitrary) or linear (volts)

  Math channels
  Functions	−x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, freq, derivative, integral, min, max, average, peak, delay
  Operands	A, B (input channels), T (time), reference waveforms, constants, pi

  Automatic measurements
  Oscilloscope mode	AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate.
  Spectrum mode	Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD plus noise, SFDR, SINAD, SNR, IMD
  Statistics	Minimum, maximum, average and standard deviation

  Serial decoding
  Protocols	1-Wire, ARINC 429, CAN, DCC, DMX512, Ethernet (10Base-T), FlexRay, I²C, I²S, LIN, PS/2, SENT, SPI, UART/RS-232, USB 1.0
  Inputs	All input channels with any mixture of protocols

  Mask limit testing
  Mask generation	Auto generate from captured waveform, manual drawing, manual coordinate entry
  Actions	Highlight on screen, select in buffer overview, activate alarm
  Statistics	Pass/fail, failure count, total count

  Alarms
  Initiating events	Capture, buffer full, mask fail
  Alarm actions	Beep, play sound, stop/restart capture, run executable, save current buffer/all buffers, trigger signal generator

  Display
  Interpolation	Linear or sin(x)/x
  Persistence modes	Digital color, analog intensity, fast, custom

  Data export
  Output file formats	BMP, CSV, GIF, JPG, MATLAB 4, PDF, PNG, PicoScope data, PicoScope settings, TXT
  Output functions	Copy to clipboard, print

  Environmental
  Temperature range (operating)	0 °C to 45 °C
  Temperature range (stated accuracy)	20 °C to 30 °C
  Temperature range (storage)	-20 to +60°C
  Humidity range (operating)	5% to 80% RH, non–condensing
  Humidity range (storage)	5 to 95% RH, non–condensing

  Physical properties
  Dimensions	200 x 140 x 35 mm (approx 7.9 x 5.5 x 1.4 in)
  Weight	<500 g (approx 1.1 lb)

  PC requirements
  Minimum	Processor: 1 GHz Memory: 512 MiB Free disk space: 32–bit: 600 MB, 64–bit: 1.5 GB Ports: USB 1.1 port (will result in significantly reduced performance)
  Recommended	Processor: 1 GHz Memory: 512 MiB Free disk space: 32–bit: 850 MB, 64–bit: 2 GB Ports: USB 2.0 (or higher) port

  Software
  Windows software	PicoScope for Windows Software development kit (SDK) Windows 7, 8 or 10 recommended (read more)
  macOS software	PicoScope for macOS (beta: feature list) Software development kit (SDK) OS versions: see release notes
  Linux software	PicoScope for Linux (beta: feature list) Software development kit (SDK) See Linux Software & Drivers for details of supported distributions
  Languages	Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish

  General
  Additional hardware (supplied)	USB 2.0 cable, user manuals
  PC connectivity	USB 2.0 port (compatible with USB 1.1 and USB 3.0; USB 1.1 not recommended)
  Power requirements	Powered from USB port
  Safety approvals	European LVD standard
  EMC approvals	European EMC standard FCC Rules Part 15 Class A
  Environmental approvals	RoHS compliant
  Total satisfaction guarantee	In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days.
  Warranty	5 years